LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Lighting System >> Front Combination Light Removal/Installation

Front Combination Light Removal/Installation

WARNING:
  • Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing the discharge headlights, always refer to the discharge headlight service warnings. (See DISCHARGE HEADLIGHT SERVICE WARNINGS .)
  1. Disconnect the negative battery cable.
  2. Remove the front side marker lights. (See FRONT SIDE MARKER LIGHT REMOVAL/INSTALLATION .)
  3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  4. Remove in the order indicated. See Fig 1.
    Fig 1: Removing Order Of Front Combination Light
    G01344536Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
  6. Adjust the headlight aiming. (See HEADLIGHT AIMING )
    Fig 2: Removing/Installing Front Combination Light
    G01344537Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals