LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info >> Fuel Gauge Sender Unit Removal/Installation >> Fuel Gauge Sender Unit (Main) >> Notes

Fuel Gauge Sender Unit (Main): Notes

  1. Remove the rear seat. (See REAR SEAT REMOVAL/INSTALLATION .)
  2. Drain the fuel from the fuel tank. (See FUEL PUMP UNIT REMOVAL/INSTALLATION .)
  3. Disconnect the negative battery cable.
  4. Remove the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION .)
  5. Remove in the order indicated. See Fig 1.
    Fig 1: Removal Order Of Fuel Gauge Sender Unit
    G01344783Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
    Fig 2: Removing/Installing Fuel Gauge Sender Unit
    G01344784Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals