Rear Washer Nozzle Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the rear spoiler. (See REAR SPOILER REMOVAL/INSTALLATION .)
Remove the rear washer hose from the rear washer nozzle.
Compress the hooks of the rear washer nozzle.
Pull the rear washer nozzle out to remove it.

Fig 1: Removing Rear Washer Nozzle
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.
Adjust the rear washer nozzle. (See REAR WASHER NOZZLE ADJUSTMENT .)