LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (Security System And Locks System) >> Trunk Lid Striker Removal/Installation

Trunk Lid Striker Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  2. Remove the bolts, then remove the trunk lid striker.
    Fig 1: Removing Trunk Lid Striker
    G01915176Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
  4. Adjust the trunk lid opener cable. (See TRUNK LID OPENER CABLE ADJUSTMENT  .)
scientia non olet · About LEMON Manuals