LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (Security System And Locks System) >> Rear Door Lock Actuator Removal/Installation

Rear Door Lock Actuator Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the door screen. (See REAR DOOR LOCK AND OPENER REMOVAL/INSTALLATION  .)
  3. Disconnect the rear door lock actuator connector.
  4. Disconnect the rod from the outer handle.
  5. Remove the screws, and then remove the rear door lock.
  6. Remove the screws, and then remove the rear door lock actuator from the rear door lock.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals