Passenger's Side

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the passenger-side front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
Push out the clip from the reverse side of the trim, and remove the switch panel.
Remove the screw, and remove the power window subswitch.

Fig 1: Identifying Components Of Power Window Subswitch - Passenger Side
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.