LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual A/C-Heater Systems - HVAC >> Vacuum Control Motor - Defrost >> Removal and Installation

Removal and Installation

Fig 1: Removing/Installing Vacuum Control Motor
G01162290Courtesy of MAZDA MOTORS CORP.
  1. Remove the vacuum control motor.
    1. Disconnect the vacuum line.
    2. Remove the two screws.
    3. Disconnect the vacuum control motor from the door lever.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals