LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual A/C-Heater Systems - HVAC >> Evaporator Core Orifice >> Removal

Evaporator Core Orifice: Removal

Fig 1: Disconnecting Condenser-To-Evaporator Line At Orifice Tube
G01162218Courtesy of MAZDA MOTORS CORP.
CAUTION:
  • Plug all ports to prevent contamination from dirt or moisture.
  1. Disconnect the condenser to evaporator line at the orifice tube. Refer to SPRING LOCK COUPLING  .
    Fig 2: Engaging Special Tool Onto The A/C Evaporator Core Orifice
    G01162219Courtesy of MAZDA MOTORS CORP.
  2. Engage the special tool onto the A/C evaporator core orifice.
    Fig 3: Removing A/C Evaporator Core Orifice
    G01162220Courtesy of MAZDA MOTORS CORP.
  3. Hold the special tool T-handle stationary and rotate the special tool body to remove the A/C evaporator core orifice.
    Fig 4: Engaging Special Tool Onto The A/C Evaporator Core Orifice
    G01162221Courtesy of MAZDA MOTORS CORP.
  4. If the A/C evaporator core orifice is broken, screw the end of the special tool into the broken A/C evaporator core orifice.
    Fig 5: Removing A/C Evaporator Core Orifice
    G01162222Courtesy of MAZDA MOTORS CORP.
  5. Hold the special tool T-handle stationary and rotate the special tool body to remove the broken A/C evaporator core orifice.
scientia non olet · About LEMON Manuals