LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> 1999: B2500, B3000, B4000 >> Monitor Repair Verification Drive Cycle >> HO2S Monitor Repair Verification Drive Cycle

HO2S Monitor Repair Verification Drive Cycle

  1. PerformVehicle Preparation For Drive Cycles .
  2. Drive in stop-and-go traffic for 6 minutes with at least one idle period.
  3. Accelerate to 45 mph (72 km/h) and maintain speed for 1 minute.
  4. Bring the vehicle to a stop and access the ON-BOARD SYSTEM READINESS TESTS menu to check completion status.
    • If completed, Oxygen Sensor monitoring status changes from NO to YES.
    • If not completed, turn the key to OFF then repeat from step 2 at least one more time.
  5. Verify no DTCs are available with exception of P1000.
scientia non olet · About LEMON Manuals