LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Disc Brake System & Drum Brake System) >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (4WD)

Removal & Installation (4WD)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Mazda B4000, 2004 Mazda B3000, 2004 Mazda B2300, 2003 Mazda B4000, and 2003 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove front wheel assemblies and brake caliper. See FRONT DISC BRAKE PADS  . Remove the two front disc brake caliper anchor plate bolts. See Fig 1 . Remove the front disc brake caliper anchor plate.
  2. Remove and discard spring nut and slide rotor off hub. To install, reverse removal procedure. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Exploded View Of Front Brake Assembly (4WD)
G00281114Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals