LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Disc Brake System & Drum Brake System) >> Torque Specifications

Torque Specifications

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Mazda B4000, 2004 Mazda B3000, 2004 Mazda B2300, 2003 Mazda B4000, and 2003 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Brake Line Fitting 11-14 (15-20)
Brake Pedal Mounting bolts 15-21 (21-29)
Brake Pressure Control Valve 10-16 (13-22)
Brake Pressure Switch 11-14 (14-20)
Caliper Bleeder Screw 9-13 (12-18)
Front Brake Hose-To-Caliper bolt 25 (34)
Front Caliper Mounting Bolts 21-26 (28-36)
Front Disc Brake Anchor Plate Bolts 85 (114)
Front Wheel Bearings (1)
Step 1 Tighten 17-24 (23-34)
Step 2 Loosen 180 Degrees
Step 3 (2)
Master Cylinder Nuts 14-20 (18-27)
Parking Brake Control
Mounting Bolts 13-17 (17-21)
Release Mounting Bolts (3)
Power Brake Unit Mounting Nuts 15-21 (21-29)
Rear Parking Brake Wireform Bracket 26 (35)
Wheel Cylinder Mounting Bolts 9-13 (12-18)
Wheel Lug Nuts 100 (135)
INCH Lbs. (N.m) 
Wheel Cylinder Bleeder Screw 62-79 (7-9)

(1) The front disc brake hub & rotor should be rotated while adjusting front wheel bearing end play.
(2) Tighten adjusting nut to 18 INCH lbs. (2.0 N.m).
(3) Tighten bolts to 21 INCH lbs. (2.9 N.m).