LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Power Door Locks & Keyless Entry) >> Removal & Installation >> Door Key Cylinder Switch

Door Key Cylinder Switch

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close the door glass completely.
  2. Disconnect the negative battery cable.
  3. Remove the door screen. See FRONT DOOR LOCK AND OPENER  .
  4. Disconnect the door key cylinder switch connector.
  5. Disconnect the rods.
  6. Remove the nuts, and remove the outer handle.
  7. Remove the pin, and remove the door key cylinder switch from the outer handle.
  8. Install in the reverse order of removal.
Fig 1: Removing Door Key Cylinder Switch
G01196457Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals