LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Automatic Transmission - Diagnosis [GF4A-El]) >> Performance Tests >> Road Test >> "D" Position - O/D OFF switch off

"D" Position - O/D OFF switch off

WARNING: This page is about a different car, the 2002 Mazda 626 and 2001 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: NORMAL and SLOPE mode are automatically selected by the PCM. PCM shifts to SLOPE mode when upgrade or downgrade is about 4 percent or greater, and shifts to NORMAL mode when upgrade or downgrade is about 3 percent or less.
  1. Move gearshift lever to "D" position. Accelerate vehicle at half throttle and WOT. Ensure upshifts and downshifts are obtained at shift points specified. See SHIFT SPEED SPECIFICATIONS . Drive vehicle in 4th, 3rd and 2nd gears to verify kickdown occurs at shift points specified.
  2. Decelerate vehicle and verify engine braking effect is felt in 4th and 3rd gears. Drive vehicle to verify TCC operation is obtained at operating points specified. See SHIFT SPEED SPECIFICATIONS .
scientia non olet · About LEMON Manuals