LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Manual A/C-Heater Systems - HVAC) >> Removal & Installation >> Panel/Floor Door Actuator Removal/Installation

Panel/Floor Door Actuator Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws and the instrument panel support brace.
    Fig 1: Removing Instrument Panel Support Brace
    G02673278Courtesy of MAZDA MOTORS CORP.
  2. Remove the screws.
    Fig 2: Removing Panel/Floor Door Actuator Screws
    G02673279Courtesy of MAZDA MOTORS CORP.
  3. Disconnect the vacuum hose.
    CAUTION: Do not attempt to bend any part of the lever. It is brittle and will break.
  4. Rotate the vacuum control motor, disengage the lever, and remove the vacuum control motor.
  5. Install in reverse order of removal.
scientia non olet · About LEMON Manuals