Panel Defrost Door Actuator Removal/Installation
WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the screws and the instrument panel support brace.
- Remove the screws.
- Disconnect the vacuum hose.
- Rotate the vacuum control motor, disengage the lever, and remove the vacuum control motor.
- Install in reverse order of removal.
CAUTION:
Do not attempt to bend any part of the lever. It is brittle and will break.