LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Engine Mechanical - Overhaul - (AJ W/VVT)) >> Cylinder Block Disassembly (II) >> Connecting Rod Cap Disassembly Note

Connecting Rod Cap Disassembly Note

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before removing the connecting rod cap, inspect the connecting rod side clearance. (See CONNECTING ROD SIDE CLEARANCE INSPECTION .)
  2. Remove the connecting rod bolt from the connecting rod cap by tapping the bolt with a plastic hammer.
scientia non olet · About LEMON Manuals