LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Washer System & Wiper System) >> Windshield Washer Nozzle Removal/Installation

Windshield Washer Nozzle Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION .)
  2. Remove the windshield washer hose from the windshield washer nozzle. (See WINDSHIELD WASHER HOSE REMOVAL/INSTALLATION  .)
  3. Squeeze the tabs of the windshield washer nozzle.
  4. Pull the windshield washer nozzle out to remove it.
  5. Install in the reverse order of removal.
    Fig 1: Removing/Installing Windshield Washer Nozzle
    G01344637Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals