LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Exterior Trim) >> Cowl Grille Removal/Installation

Cowl Grille Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM & BLADE REMOVAL/INSTALLATION .)
  2. Disconnect the windshield washer hose. (See WINDSHIELD WASHER HOSE REMOVAL/INSTALLATION .)
  3. Remove the screws.
  4. Remove the weatherstrip.
  5. Remove the cowl grille.
  6. Install in the reverse order of removal.
    Fig 1: Removing/Installing Cowl Grille
    G01344474Courtesy of MAZDA MOTORS CORP.