Rear Washer Motor Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION .)
Connect battery positive voltage to the terminal B and ground to the terminal A of the motor.
Verify that the rear washer motor operates.
- If the motor does not operate, replace the rear washer motor.
  
  Fig 1: Identifying Rear Washer Motor Circuit, Terminals & Connector View
  Courtesy of MAZDA MOTORS CORP.