Rear Washer Nozzle Removal/Installation
WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the liftgate lower trim. See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .
- Remove the rear washer hose from the rear washer nozzle.
- Compress the hooks of the rear washer nozzle.
- Pull the rear washer nozzle out to remove it.
- Install in the reverse order of removal.
- Adjust the rear washer nozzle. See REAR WASHER NOZZLE ADJUSTMENT .