LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Washer System & Wiper System) >> Wiper/Washer System >> Rear Washer Nozzle Adjustment

Rear Washer Nozzle Adjustment

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a needle or equivalent tool into the spray hole of the rear washer nozzle and adjust the nozzle direction as shown.
Fig 1: Adjusting Rear Washer Nozzle
G01196706Courtesy of MAZDA MOTORS CORP.