Section 1032 (Abs Guided Routine - Pinpoint Tests A - Be)
WARNING: This page is about a different car, the 2020 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
- Pinpoint Tests A: ABS Module Low Voltage Concern
- Pinpoint Tests AA: Steering Angle Reset DTC
- Pinpoint Tests AB: Wheel Speed Sensor Erratic Signal DTCs
- Pinpoint Tests AC: Brake Pedal Input Concern
- Pinpoint Tests AD: Stability System Active Too Long Concern
- Pinpoint Tests AE: ABS Module Communication Concern With PSCM
- Pinpoint Tests AF: ABS Module VIN Mismatch
- Pinpoint Tests AG: Stability Control Sensor Signal Failure Faults
- Pinpoint Tests AH: Brake Booster Vacuum Supply Faults
- Pinpoint Tests AI: ABS Module Communication Concern With PCM
- Pinpoint Tests AJ: Steering Wheel Position Sensor Signal Fault
- Pinpoint Tests AK: Calibration Fault Between The ABS Module And The HCU
- Pinpoint Tests AL: Incorrect Wheel Speed Sensor Fault
- Pinpoint Tests AM: Brake Pressure Sensor Fault
- Pinpoint Tests AN: Stability Control Sensor Initialization Fault
- Pinpoint Tests AO: RCM Installed Incorrectly Concern
- Pinpoint Tests AQ: Cruise Control Braking Fault
- Pinpoint Tests AR: ABS Module Communication Concern With IPC
- Pinpoint Tests AS: ABS Module Communication Concern With FCIM
- Pinpoint Tests AT: The ABS Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Tests AU: ABS Module Communication Concern With The TCCM
- Pinpoint Tests AV: ABS Module Communication Concern With The GSM
- Pinpoint Tests AW: SASM Communication Concern With PCM
- Pinpoint Tests AX: SASM Communication Concern With ABS Module
- Pinpoint Tests AY: SASM Communication Concern With VDM
- Pinpoint Tests AZ: SASM Communication Concern With SECM
- Pinpoint Tests B: Wheel Speed Sensor Erratic Signal Faults
- Pinpoint Tests BA: SASM Communication Concern With GWM
- Pinpoint Tests BB: SASM Communication Concern With IPC
- Pinpoint Tests BC: SASM Communication Concern With APIM
- Pinpoint Tests BD: SASM Low Voltage Concern
- Pinpoint Tests BE: SASM High Voltage Concern