Pinpoint Test H: Poor Image Quality - Vehicles With 360 Degree Camera: Notes
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
Possible Causes
- Dirty or scratched camera lens
- Fuse
- Wiring, terminals or connectors
- Camera(s)
- IPMB
- APIM
- Low voltage Direct Current/Direct Current (DC/DC) converter module (also known as the Voltage Quality Module (VQM)) concern, if equipped
Visual Inspection and Diagnostic Pre-Checks
- Inspect the camera lenses for damage, dirt, debris and scratches.
- BJB fuse 23 (15A).
NOTE:
Before disconnecting any of the cameras, verify the connectors are properly seated and latched.