Pinpoint Test A : B129C:08: Notes
NOTE:
Before disconnecting any of the active park assist sensors, verify the connectors are properly seated and latched.
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| IPMB B129C:08 | Left Front Side Sensor: Bus Signal/Message Failures | A continuous and on-demand DTC that sets in the IPMB when there is a message failure on the LIN for the left front active park assist sensor. |
Possible Sources
- Wiring, terminals or connectors
- Left front active park assist sensor
- IPMB