Parking Aid Camera
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Condition | Possible Sources | Actions |
|---|---|---|
| The rear video is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test A |
| The FDIM displays REAR VIDEO CAMERA IS UNAVAILABLE PLEASE CONTACT YOUR DEALERSHIP and a black screen/no image | Refer to the Pinpoint Test | GO to Pinpoint Test A |
| Static/flashing/blinking/flickering/scrolling or rolling image/screen/scrolling horizontal lines | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| Poor image quality (foggy/cloudy/fuzzy/blurry/hazy image or moisture/water in lens or black spots) | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| Frozen screen or slow screen transitions | APIM | DIAGNOSE the APIM. Refer to the appropriate Information and Entertainment System article for the procedure. |
| Manual zoom function is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test E |
| Visual park aid alert is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test C |
| Active guidelines are not displayed on the rear video camera image | Refer to the Pinpoint Test | GO to Pinpoint Test D |
| Fixed guidelines are not displayed on the video image | Refer to the Pinpoint Test | GO to Pinpoint Test D |
| Video camera delay feature is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test D |
| Video image is upside down | Video camera internal failure Incorrect camera installed on vehicle |
INSTALL a new rear video camera. REFER to: Parking Aid Camera . |
| All other image concerns | Refer to the Pinpoint Test | GO to Pinpoint Test A |