LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> P100F - WASTEGATE Control Pressure/BARO Correlation

P100F - WASTEGATE Control Pressure/BARO Correlation

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2016 Lincoln Navigator, 2016 Lincoln MKZ, 2016 Lincoln MKX, 2016 Lincoln MKT, and 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P100F - WASTEGATE CONTROL PRESSURE/BARO CORRELATION

Description:  This DTC sets when the difference between the wastegate vacuum sensor reading is greater than the barometric pressure (BARO) sensor, manifold absolute pressure (MAP) sensor and the turbocharger boost pressure (TCBP) sensor readings by a calibrated threshold at key ON, engine OFF (KOEO), and the fault timer has exceeded the calibrated time threshold.
Possible Causes: 
  • Contaminated or restricted wastegate vacuum sensor
  • Restricted wastegate actuator control tube
  • Restricted vent tube from the turbocharger wastegate regulating valve to the intake air tube
  • Damaged wastegate vacuum sensor
Diagnostic Aids:  The typical sensor difference threshold is 8.47 kPa (1.23 psi) and time threshold is 5 seconds.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test HN .