P0704 - Clutch Switch Input Circuit
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2016 Lincoln Navigator, 2016 Lincoln MKZ, 2016 Lincoln MKX, 2016 Lincoln MKT, and 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0704 - CLUTCH SWITCH INPUT CIRCUIT
| Description: | When the clutch pedal is applied the voltage switches to low. This DTC sets if the PCM does not see the clutch pedal voltage change from high to low. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | When the clutch pedal is applied and then released, the clutch pedal switch voltage should cycle. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test TA . | ||