LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> P0504 - Brake Switch Correlation

P0504 - Brake Switch Correlation

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2016 Lincoln Navigator, 2016 Lincoln MKZ, 2016 Lincoln MKX, 2016 Lincoln MKT, and 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0504 - BRAKE SWITCH CORRELATION

Description:  This DTC sets when the calibrated threshold is exceeded during a comparison test between the brake pedal switch (BPS) and the brake pedal position (BPP) switch.
Possible Causes: 
  • Damaged brake switch
  • BPS circuit open
  • BPS circuit short to voltage
  • BPS circuit short to ground
  • BPP circuit open
  • BPP circuit short to voltage
  • BPP circuit short to ground
Diagnostic Aids:  Check the state of the BOO1 and BOO2 PIDs. The BOO1 PID is normally open and BOO2 PID is normally closed.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test FD .