LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> P0108 - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

P0108 - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2016 Lincoln Navigator, 2016 Lincoln MKZ, 2016 Lincoln MKX, 2016 Lincoln MKT, and 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0108 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH

Description:  This DTC sets when the manifold absolute pressure (MAP) sensor operating voltage is greater than the maximum allowable calibrated parameter of 4.96 volts.
Possible Causes: 
  • VREF circuit short to voltage
  • MAP circuit open
  • MAP circuit short to voltage
Diagnostic Aids:   
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test DM .