P00CE - Intake Air Temperature Measurement System
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2016 Lincoln Navigator, 2016 Lincoln MKZ, 2016 Lincoln MKX, 2016 Lincoln MKT, and 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P00CE - INTAKE AIR TEMPERATURE MEASUREMENT SYSTEM
| Description: | This DTC sets when the charge air cooler temperature (CACT), intake air temperature (IAT) and the intake air temperature 2 (IAT2) PIDs are each greater than 16.67°C (30°F) different from each other at start up or that each sensor is out of the calibrated range at engine start up after a soak period of at least 6 hours when a block heater is not used. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Compare all sensor readings to the ambient temperature to determine which sensor is reading correctly. This DTC may be accompanied by other DTCs. Check for other DTCs and diagnose those first. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DN . | ||