LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1607 (Supplemental Restraint System (Except Electric) (3 Of3)) >> Removal And Installation >> Passenger Airbag >> Installation

Passenger Airbag: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Incorrect repair techniques or actions can cause an accidental pyrotechnic device deployment. Make sure the supplemental restraint and pedestrian protection system (if equipped) is depowered before reconnecting the component. Refer to the depowering General Procedure in Supplemental Restraint System (SRS) Depowering and Repowering . Failure to precisely follow depowering instructions could result in serious personal injury from an accidental deployment.
  1. WARNING: Before installing the passenger air bag module assembly:

    • Inspect the passenger air bag module and instrument panel/deployment chute cavity for any damage or foreign material. 
    • Remove any foreign material from the passenger air bag module and instrument panel/deployment chute cavity. 
    • Install new parts if damaged. 

    Failure to follow these instructions may result in the passenger air bag deploying incorrectly, which increases the risk of serious personal injury or death in a crash.  To install, reverse the removal procedure.

  2. If the SRS was depowered, repower the SRS. Refer to: Supplemental Restraint System (SRS) Depowering and Repowering .
scientia non olet · About LEMON Manuals