LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1601 (Handles, Locks, Latches And Entry Systems (Except Electric) (2 Of 2)) >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Vehicles With: One-Touch Open and Close Front Windows >> Pinpoint Tests >> Pinpoint Test Ag : U3003:62 >> Notes

Pinpoint Test Ag : U3003:62: Notes

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Remote Keyless Entry and Alarm for schematic and connector information.

Normal Operation and Fault Conditions 

The DDM and PDM each have a hot at all times voltage supply. The modules monitor this voltage and also receive a battery voltage message from the BCM.

If the voltage to the DDM or PDM drops low enough, all door module functions are inoperative.

DDM/ PDM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U3003:62 Battery Voltage: Signal Compare Failure Sets when the DDM or PDM detects the voltage amount from the supply circuit is significantly lower than what is reported from the BCM.

Possible Causes 

scientia non olet · About LEMON Manuals