Roof Opening Panel Alignment

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Adjustment

WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in GENERAL INFORMATION (EXCEPT ELECTRIC) . Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions .
NOTE: The roof opening panel must be in the CLOSED position.

On both sides. Loosen the retainers for the alignment.

Courtesy of FORD MOTOR COMPANY
Measure the front of the roof opening panel glass to roof clearances as shown.

Courtesy of FORD MOTOR COMPANY
Measure the rear of the roof opening panel glass to roof clearances as shown.

Courtesy of FORD MOTOR COMPANY
On both sides. Tighten the retainers.
Torque

: 35 lb.in (4 Nm)

Courtesy of FORD MOTOR COMPANY
Initialize the power roof opening panel. Refer to: Power Roof Opening Panel Initialization .