Pinpoint Test E : The One-Touch Up Feature Is Inoperative: Notes

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Power Windows for schematic and connector information.

Normal Operation and Fault Conditions

REFER to: Glass, Frames and Mechanisms - Vehicles With: One-Touch Open and Close Front Windows - System Operation and Component Description .

Possible Sources

Power window motor not initialized
Battery power was lost/disconnected
Wiring, terminals or connectors
Power window motor
DDM
PDM
Driver Rear Door Module (DRDM)
Passenger Rear Door Module (PRDM)

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Conditions
B12DC:54	Front Window Motion/Position Sensor: Missing Calibration	This DTC sets when the DDM or PDM has lost calibration data. When this DTC is present, the front window will not have one-touch up or one-touch down functionality.
B12DD:54	Rear Window Motion/Position Sensor: Missing Calibration	This DTC sets when the Driver Rear Door Module (DRDM) or Passenger Rear Door Module (PRDM) has lost calibration data. When this DTC is present, the rear window will not have one-touch up or one-touch down functionality.