Pinpoint Test B : U3003:62: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Refer to Remote Keyless Entry and Alarm for schematic and connector information.
Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3003:62 | Battery Voltage: Signal Compare Failure | Sets in continuous memory in the RFA module if the voltage is 2 or more volts less than the voltage measured at the BCM. |
Possible Sources
- Battery
- Generator
- PCM
- RFA module
- Wiring, terminals or connectors