Pinpoint Test BV : U3006:16: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Instrument Cluster for schematic and connector information.
Normal Operation and Fault Conditions
IPC DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | Sets in continuous memory and on-demand in the IPC if the IPC detects battery voltage below 9 volts on the voltage supply circuit for longer than 5 seconds if the engine is not running or longer than 1 second if the engine is running. |
Possible Sources
- Wiring, terminals or connectors
- High circuit resistance
- Charging system concern
- IPC