Pinpoint Test AU : The Key-In-Ignition Warning Chime Is Inoperative (Without Intelligent Access [IA]): Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Power Distribution for schematic and connector information.
Normal Operation and Fault Conditions
See Key-In-Ignition Warning Chime. REFER to: Warning Chimes - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10F1:13 | Key In Switch: Circuit Open | An on-demand DTC that sets if the BCM detects an open on the key-in-ignition switch input circuit or if the BCM detects ignition start, run/start or run/accessory inputs without the key-in-ignition input. |
Possible Sources
- Interior lighting concern
- Wiring, terminals or connectors
- Key-in-ignition warning switch (part of the ignition switch) (without push button start)
- BCM
- IPC