LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1561 (Climate Control System - General Information (Except Electric) (2 Of 2)) >> Removal And Installation >> Air Conditioning (A/C) Compressor Inlet Line - 2.0L EcoBoost (184kW/250PS) - MI4 >> Installation

Air Conditioning (A/C) Compressor Inlet Line - 2.0L EcoBoost (184kW/250PS) - MI4: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install and lubricate new O-ring seals. Refer to the appropriate Specifications in SPECIFICATIONS .

  3. Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to the appropriate Refrigerant Oil Adding procedure in this article.
scientia non olet · About LEMON Manuals