LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1560 (Climate Control System - General Information (Except Electric) (1 Of2)) >> Diagnosis And Testing >> Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC) >> Pinpoint Test(s) >> Pinpoint Test Q : B1A63:00, B1A64:00 >> Notes

Pinpoint Test Q : B1A63:00, B1A64:00: Notes

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Automatic Climate Control System for schematic and connector information.

Normal Operation and Fault Conditions 

Sunload sensor, REFER to: Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC) - System Operation and Component Description 

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1A63:00 Right Solar Sensor: No Sub Type Information This Continuous Memory Diagnostic Trouble Code (CMDTC) sets when the HVAC control module senses unexpected voltage from the sunload sensor input circuit indicating an open, short to voltage or short to ground.
B1A64:00 Left Solar Sensor: No Sub Type Information This Continuous Memory Diagnostic Trouble Code (CMDTC) sets when the HVAC control module senses unexpected voltage from the sunload sensor input circuit indicating an open, short to voltage or short to ground.

Possible Sources