Pinpoint Test H : The Heated Steering Wheel Switch Status Led Is Inoperative Or Always On: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Adjustable Steering Column for schematic and connector information.
Normal Operation and Fault Conditions
The SASM supplies voltage to the heated steering wheel switch (part of active park assist switch assembly) status LED when the heated steering wheel system is activated.
Possible Causes
- Wiring, terminals or connectors
- SASM
- Heated steering wheel switch
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13BE:11 | Steering Wheel Heater Mode Indicator: Circuit Short To Ground | GO to Pinpoint Test H |
| B13BE:15 | Steering Wheel Heater Mode Indicator: Circuit Short To Battery or Open | GO to Pinpoint Test H |