LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1168 (Exterior Lighting System) >> Diagnosis And Testing >> Parking, Rear and License Plate Lamps >> Pinpoint Tests >> Pinpoint Test B : The Parking, Rear Or License Plate Lamps Are On Continuously >> Notes

Pinpoint Test B : The Parking, Rear Or License Plate Lamps Are On Continuously: Notes

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Parking, Rear and License Lamps for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Exterior Lighting - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B10F3:15 Left Front Position Light: Circuit Short to Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the LH rear side marker lamp output circuit.
B10F4:15 Right Front Position Light: Circuit Short to Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the RH rear side marker lamp output circuit.
B1445:15 Rear Park Lamps Output: Circuit Short to Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the rear parking lamp output circuit.
B1446:15 Front Park Lamps Output: Circuit Short to Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the front parking lamps output circuit.
B149E:15 Left Front Position/Sidemarker: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the LH front parking lamp output circuit.
B149F:15 Right Front Position/Sidemarker: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the RH front parking lamp output circuit.
B14A2:15 Tailgate/Liftgate Applique Lamps: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the liftgate applique (center) parking lamp output circuit.
B14B2:15 Left Position Lamps Circuit: Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the LH parking lamp output circuit.
B14B3:15 Right Position Lamps Circuit: Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects a short to voltage from the RH parking lamp output circuit.

Possible Sources