LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1160 (Handles, Locks, Latches And Entry Systems) >> Diagnosis And Testing >> Locks, Latches and Entry Systems >> Pinpoint Tests >> Pinpoint Test X : A Door Passive Entry Feature Is Inoperative >> Notes

Pinpoint Test X : A Door Passive Entry Feature Is Inoperative: Notes

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Remote Keyless Entry and Alarm for schematic and connector information.

Normal Operations and Fault Conditions 

REFER to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .

BCM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1336:01 Left Front Door External Antenna: General Electrical Failure Sets when the BCM detects a fault from one of the circuits to the left front keyless entry antenna (internal to the exterior door handle).
B1337:01 Right Front Door External Antenna: General Electrical Failure Sets when the BCM detects a fault from one of the circuits to the right front keyless entry antenna (internal to the exterior door handle).
B1381:11 Left Front Door Handle Proximity Sensor: Circuit Short To Ground Sets when the BCM detects a fault from one of the circuits to the left front exterior door handle.
B1381:15 Left Front Door Handle Proximity Sensor: Circuit Short To Battery or Open Sets when the BCM detects a fault from one of the circuits to the left front exterior door handle.
B1381:29 Left Front Door Handle Proximity Sensor: Signal Invalid Set when the BCM detects an activated touch sensor for more than 5 minutes.
B1382:11 Right Front Door Handle Proximity Sensor: Circuit Short To Ground Sets when the BCM detects a fault from one of the circuits to the right exterior door handle.
B1382:15 Right Front Door Handle Proximity Sensor: Circuit Short To Battery or Open Sets when the BCM detects a fault from one of the circuits to the right exterior door handle.
B1382:29 Right Front Door Handle Proximity Sensor: Signal Invalid Set when the BCM detects an activated touch sensor for more than 5 minutes.
B1383:11 Left Rear Door Handle Proximity Sensor: Circuit Short To Ground Sets when the BCM detects a fault from one of the circuits to the left rear exterior door handle.
B1383:15 Left Rear Door Handle Proximity Sensor: Circuit Short To Battery or Open Sets when the BCM detects a fault from one of the circuits to the left rear exterior door handle.
B1383:29 Left Rear Door Handle Proximity Sensor: Signal Invalid Set when the BCM detects an activated touch sensor for more than 5 minutes.
B1384:11 Right Rear Door Handle Proximity Sensor: Circuit Short To Ground Sets when the BCM detects a fault from one of the circuits to the right rear exterior door handle.
B1384:15 Right Rear Door Handle Proximity Sensor: Circuit Short To Battery or Open Sets when the BCM detects a fault from one of the circuits to the right rear exterior door handle.
B1384:29 Right Rear Door Handle Proximity Sensor: Signal Invalid Set when the BCM detects an activated touch sensor for more than 5 minutes.

Possible Cause 

Visual Inspection and Diagnostic Pre-checks