Pinpoint Test AK : The Shift To Park Message Is Never Or Always Displayed (IA Only): Notes

Refer to Instrument Cluster , Instrument Cluster for schematic and connector information.

Diagnostic Overview 

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.

Normal Operation and Fault Conditions 

Refer to Shift To Park Message Display in Information And Message Center .

Possible Sources 

• Communication concern
• BCM
• IPC

Visual Inspection and Diagnostic Pre-checks 

Visually inspect the transmission range selector and make sure that the selector lever fully locks in the PARK (P) position and that there is not any binding of the transmission range selector.