Pinpoint Test C : DTC P188B: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Fuse 70 (10A) protects multiple components. Check related systems that may be inoperative.
Refer to All Wheel Drive (AWD) , for schematic and connector information.
Normal Operation and Fault Conditions
The AWD system uses data from other systems as inputs to the PCM. The PCM uses the inputs to determine the appropriate time to send a signal and have the AWD relay module energize the ATC solenoid.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P188B | AWD Clutch Control Circuit | When the PCM detects an open, a short to ground or voltage on the ATC solenoid voltage supply and or return circuit. |