LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2000 >> Continental >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panels - Analog >> System Tests >> Test N: Seat Belt Warning Is Inoperative (Chime Is Operative)

Test N: Seat Belt Warning Is Inoperative (Chime Is Operative)

  1. Ensure driver's seat belt is not fastened. Turn ignition switch to RUN position. If seat belt warning chime sounds, go to next step. If warning chime does not sound, repair seat belt warning chime. Perform TEST Z: SEAT BELT WARNING CHIME INOPERATIVE  .
  2. Ensure driver's seat belt is not fastened. Turn ignition switch to RUN position and wait one minute. If seat belt warning light does not prove out, go to next step. If seat belt warning light proves out, system is okay at this time.
  3. Connect New Generation Star (NGS) tester to Data Link Connector (DLC). Turn ignition switch to RUN position. Using NGS tester, select LCM active command SEATBELT. Trigger SEATBELT on. If seat belt warning light is on, replace LCM. If seat belt warning light is not on, replace instrument cluster.
scientia non olet · About LEMON Manuals