LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1997 >> Mark VIII Base >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic Air >> Removal & Installation >> Spindle Assembly (Front) >> Installation

Spindle Assembly (Front): Installation

  1. Place spindle on lower ball joint stud and attach to upper control arm. Install NEW upper pinch bolt and tighten. Install NEW lower ball joint nut and tighten. Install hub and bearing assembly with NEW nut. Install rotor and caliper/anchor plate assembly.
  2. Install anti-lock brake sensor. Install stabilizer bar link and tie rod end to spindle. Tighten NEW nuts and bolts to specification. See TORQUE SPECIFICATIONS  table. Install wheel, and turn air suspension on.
scientia non olet · About LEMON Manuals