LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1997 >> Continental >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Electronic Air >> Removal & Installation (Front Suspension - Mechanical) >> Upper Mount & Bearing Assembly (Front) >> Installation

Upper Mount & Bearing Assembly (Front): Installation

  1. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS  .
  2. On 1996 model, replace air spring solenoid "O" rings, if damaged. Coat "O" rings with Silicone Dielectric Compound (D7AZ-19A331-A) before installing.
  3. Once all components are installed, air springs must be refilled before lowering vehicle. See AIR SPRING FILL OR VENT  under REMOVAL & INSTALLATION (AIR SYSTEM & ELECTRICAL).
scientia non olet · About LEMON Manuals