LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System - Service Information) >> VACUUM SWITCHING VALVE (for Engine Mounting) >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 23 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 23 [03/2024 - ]
  2. REMOVE RADIATOR UPPER AIR GUIDE PLATE 

    Refer to PROCEDURE - Step 1 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 1 [03/2024 - ]

  3. REMOVE INLET AIR CLEANER ASSEMBLY 

    See step  4

  4. DISCONNECT VACUUM HOSE 

    See step  5

  5. DISCONNECT NO. 2 VENTILATION HOSE 

    See step  6

  6. REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE 

    See step  7

  7. DISCONNECT ENGINE WIRE 
    1. GTY1076662Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE WIRE HARNESS CLAMP BRACKET 
    1. GTY1077477Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. DISCONNECT VACUUM HOSE 
    1. GTY1076657Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System) 
    1. GTY1077476Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals