LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System - Service Information) >> Ignition Coil And Spark Plug >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 23 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 23 [03/2024 - ]
  2. REMOVE IGNITION COIL ASSEMBLY 
    1. GTY1077439Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the 4 ignition coil assembly connectors.
      2. Using an 8 mm socket wrench, remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.
        NOTE:

        If an ignition coil assembly has been struck or dropped, replace it.

  3. REMOVE SPARK PLUG 
    Refer to PROCEDURE - Step 3
scientia non olet · About LEMON Manuals