LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (2 Of 2) >> Power Back Door Control Switch >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH 

    Refer to PROCEDURE - Step 13

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 15

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 15 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 15 [03/2024 - ]

  4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 12

  5. REMOVE NO. 1 INSTRUMENT SIDE PANEL 
    Refer to PROCEDURE - Step 13
  6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 13 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 13 [03/2022 - ]

  7. REMOVE LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  8. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY 
    1. GTY1054574Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals